Description:
1.Funduino UNO R3 2012 launched an easy to use open-source controller hardware and UNO and no major changes, the biggest difference is that USB to serial part of the circuit switch is a ATMega16U2 microcontroller, which the cost increase, the software part of the same as before, no major changes.
2.Pin changes plus two I2C pins (SDA and SCL: next to the AREF pin, the Analog 4 and 5 copy, not the additional I2C interface), added two pins, the RESET next one is IOREF, , allowing the expansion board to adapt to on-board voltage, this pin is just told to expand the board's current on-board voltage (such as UNO is 5V, the power supply pin can be seen as copy, does not provide the level pull-up), and the other is after inactive placeholder pins.
3.ATmega16U2 to replace a 8U2, this does not mean a 16K flash R3 to make your code run faster, this update for the USB interface chip, in theory, it allows the UNO can emulate USB the HID, such as the MIDI / Joystick / Keyboard.
Specification:
Model : Funduino Uno R3
Color : Blue & White & Black
Material : FR4
Operating Voltage : 5V
Input Voltage(recommended) : 7-12V
Input Voltage(limits) : 6-20V
Flash Memory: 32 KB
SRAM: 2 KB
EEPROM: 1 KB
Clock Speed: 16MHz
Weight: 0.95oz / 27g
Dimensions: (2.95 x 2.13 x 0.59)" / (7.5 x 5.4 x 1.5)cm (L x W x H)
没有评论:
发表评论